Home > Products > Industrial > Vehicle/Rail Scales
 
Home Page
Industrial
Vehicle/Rail Scales  
 
 
7461 Truckmate

Model 7461 is a steel-deck scale for weighing over-the-road vehicles. This ´Commercial Duty´ truck scale is ideal for applications with low-to-moderate traffic. It delivers proven performance at an affordable price. The modules are factory assembled and easy to install or move. Orthotropic ribs add torsional rigidity for off-center loading. Standard foundation: variable footer. Analog or DigiTOL load cells provide accurate, reliable weighing.

7531 Truckmaster

Model 7531 is a concrete-deck scale for weighing highway vehicles. It is designed for above-ground installation. Driving surface is reinforced concrete (8 inches thick) with a modular steel framework. Steel I-beam framework is assembled on site and provides a built-in side rail for safety. DigiTOL load cells transmit a powerful signal for accurate, reliable weighing.

7541 Truckmaster

Model 7541 is a concrete-deck scale for weighing highway vehicles. It is designed for installation in a pit. Reinforced concrete deck is framed by steel channel that is welded to steel support modules. Modules are fully assembled and easy to install. Modular deck coping makes scale easy to relocate. DigiTOL load cells transmit a powerful signal for accurate, reliable weighing

7560 Truckmate

Model 7560 is a concrete-deck scale for weighing highway vehicles. The driving surface is 8-inch thick concrete with a modular steel framework. This composite concrete/steel design provides a very durable scale with concrete in compression and steel in tension. Factory-assembled modules eliminate field welding, simplifying installation. Foundation options: floating beam slab, variable footer, pit. DigiTOL load cells transmit a powerful signal for accurate, reliable weighing.

7560 SD Truckmate

Model 7560 is a concrete-deck scale for weighing highway vehicles. The driving surface is 8-inch thick concrete with a modular steel framework. This composite concrete/steel design provides a very durable scale with concrete in compression and steel in tension. Factory-assembled modules eliminate field welding, simplifying installation. Foundation options: floating beam slab, variable footer, pit. DigiTOL load cells transmit a powerful signal for accurate, reliable weighing.

VTC210 Concrete/Orthotropic Weighbridge

Introducing the VTC210 Vehicle Scale. This new composite weighbridge (concrete deck/steel structure) provides an 80,000 CLC Cycle Duty rating for those very demanding applications where customers require a scale built to take high volumes of traffic at heavy loads.

 

7562 Truckmate

Model 7562 is a steel-deck scale for weighing over-the-road vehicles. This portable scale is ideal for construction, demolition, logging, sand, gravel, and other operations that move from one job site to another. Its modules are factory assembled and easy to install or move. Orthotropic ribs add torsional rigidity for off-center loading. DigiTOL load cells transmit a powerful signal for accurate, reliable weighing.

7566

Model 7566 is a steel deck weighbridge with orthotropic ribs. It is designed to weigh heavy off-road vehicles and is suited for mining, forestry, steel mills, and power plants. It can be configured as either a single-width (11 ft.-10 in.) or side-by-side (19 ft.-9 in.) scale.

VKR210  

Model VKR210 is a complete kit for converting a vehicle scale for fully electronic operation. This system of DigiTOL load cells can be installed under an existing weighbridge. It replaces costly analog load cells or high-maintenance mechanical lever systems. DigiTOL load cells transmit a powerful signal for accurate, reliable weighing

OverDrive System

OverDrive software is a powerful tool that provides complete weight and data management for vehicle scales. It enables your computer to process vehicle weighing transactions, print tickets and reports, and share data with other systems. It controls scales and peripherals such as traffic lights, gates, and unattended driver terminals.

UADT Unattended Terminal, Overdrive

For vehicle weighing applications without scale operators, METTLER TOLEDO offers two unattended terminal solutions, the UWT and UADT Weighing Terminals.

UWT Unattended Weighing Terminal

For vehicle weighing applications without scale operators, METTLER TOLEDO offers two unattended terminal solutions, the UWT and UADT Weighing Terminals.

 
7260-3000 DigiTol Railmate

7260 RAILMATE® scales provide accurate weighing of rail cars. Static scales are designed for weighing an individual rail car that is stopped on the scale. Weighbridge converts a section of railroad track into a scale. Weighbridge is designed to meet AREMA requirements for Cooper E-80 loading. DigiTOL load cells transmit a powerful signal for accurate, reliable weighing.

 

 

7260 - 4000 DigiTol Railmate

7260 RAILMATE® scales provide accurate weighing of rail cars. Static scales are designed for weighing an individual rail car that is stopped on the scale. Weighbridge converts a section of railroad track into a scale. Weighbridge is designed to meet AREMA requirements for Cooper E-80 loading. DigiTOL load cells transmit a powerful signal for accurate, reliable weighing.

 

7360 Combination Rail/Truck Scale

Model 7360 RAILMATE® scales can be used to weigh both trucks and railroad cars. They are ideal for grain elevators and other operations where both types of vehicles are weighed. Reduces costs because one scale can handle all weighing needs. Weighbridge converts a section of railroad track into a scale. Trucks are weighed on an integral concrete deck (8 inches thick). DigiTOL load cells transmit a powerful signal for accurate, reliable weighing.

IND9R86  

The IND9R86 rail scale controller is now available for order. The IND9R86 is a PC based weighing controller running a Windows based application software for dynamic weighing of coupled rail cars at speeds up to 6mph. IND9R86 is typically sold with a METTLER TOLEDO 7260CIM rail scale and offers fully automated, unattended weighing of rail cars. The system includes a scale terminal, wheel detector interface for automatic detection of trains and train speed, an industrial PC and a variety of optional peripheral accessories. Weighing is often dual draft with each set of axles weighed individually and then summed. For unstable loads such as liquids, single draft weighing using two platforms is possible.

 
   
   
© 2009 Valley Scale Services, Inc. All Rights Reserved.