ELECTRICAL COMPONENTS: Watertight magnetic switch system with thermal overload protection.
CONSTRUCTION: Heavy duty stainless steel 150 lb. (88 kg) hopper, frame, and legs. Hot tin dipped bowl, ring, and worm. Stainless steel bowl, ring, and worm ( Enterprise or Unger system) are available at extra cost.
DRIVE SYSTEM: Tandem gear reducers with mechanical clutch for engaging/disengaging auger
CAPACITY: Hopper 150 lbs. Output Up to 60 pounds (27 kg) per minute.
SAFETY: Magnetic safety interlock on lid.
STANDARD FEATURES: Stainless steel 2nd grind paddle with hook ( stainless steel first grind paddle without hook available at no charge if specified), ring wrench, and spurt guard.
OPTIONS: (Extra Cost) Adjustable stainless steel legs with casters, meat lug holder, side inlet ( either right or left side) for tandem operations, connecting hardware for tandem operations, and stainless steel bowl assembly (Enterprise or Unger system), size 32 knife and plate, 7.5 HP motor
CERTIFICATIONS: UL, CSA, NSF
WEIGHT: 608 lbs. (276 kg) net 633 lbs. (287 kg) gross
Model AFMG-52 Mixer Grinder
Specifications:
Motors
MOTOR
HP
KW
Type
Volts
Amps
Hertz
Phase
Code
AUGER
7.5
5.5
TEFC
208/230/460
24/22/11
60
3
STD
MIXER
1.75
1.3
TEFC
208/230/460
5.7/5.2/2.6
60
3
STD
AUGER
10
7.5
TEFC
208/230/460
30/26.8/13.4
60
3
OP
STD= Standard OP=Optional TEFC= Totally Enclosed Fan Cooled
ELECTRICAL COMPONENTS: Watertight magnetic switch system with thermal overload protection.
CONSTRUCTION: Heavy duty stainless steel hopper, frame, and legs. Hot tin dipped bowl, ring, and auger.
DRIVE SYSTEM: Auger: single reduction(35 pitch - 4 row) roller chain drive with tapered roller bearings. Mixer: Heavy duty combination gear motor
CAPACITY: Hopper 200 lbs. (91 kg) Output Up to 100 pounds (45.5 kg) per minute.
SAFETY: Magnetic safety interlock lid.
STANDARD FEATURES: 35 degree right hand inlet, Stainless steel2nd grind grind paddle with center arm (stainless steel first grind paddle available at no charge if specified), casters, spurt guard, right side opening lid.10 ' Cord and plug
OPTIONS: (Extra Cost) Size 52 knife and plate, connecting funnel and seal for tandem operations. Accessory cleaning and storage rack, extra long stainless steel legs (33"/833 mm to 42"/1069 mm) from floor to bowl center, left hand 35 degree side inlet, tub with no side inlet, front of left opening lid, electric or pneumatic foot switch. Stainless steel bowl, ring and auger (Enterprise or auger system)
The SE 12 D slicer, like its sister model, the VS 8 D, can be operated manually or fully automatically. It is ideally suited to slicing bulky and heavy items, such as mortadella, large hams, bread and hard vegetables.
Pre-selection of three different carriage strokes and variable carriage speed, including for sensitive products.
Just what you have been looking for, the lowest priced 30 lb. tumbler on the market. Perfect for restaurants, delis, meat market display case products and even home use. LED timer - hours and minutes. Easy to remove tank - just lift it off. Easy to clean. Vacuum gauge. Clear lid. Single speed, 9 rpm. 30 lb. capacity, 25 lb. tumble capacity. 115 volt.
DVTS 100 Tumbler
Features:
Made in the USA
115 Volt
Easy to Move Around
All Stainless Steel Construction
Four Swivel Locking Casters
Easy to Remove Lid
LED Timer
If you’re looking for an economical quality tumbler, you found it. The DVTS 100 Tumbler has everything you need. Variable speed control, 0 - 16 rpm. Easy to clean inside the tank, the lid is as wide as the tank. Safety bar and safety switch. LED timer in hours and minutes. By turning the variable speed control you can rotate the tank just where you want it for unloading, loading, and cleaning. Easy to change vacuum filter. Liquid filled vacuum gauge. Drain plug. This tumbler even has a cutting board on top. Gain profits by tumbling, weight gain, and tenderizing all in minutes.
DVTS 200 Tumbler
Features:
Made in the USA
Easy to Move Around
All Stainless Steel Construction
Four Swivel Locking Casters
Easy to Remove Lid
LED Timer
Nema 4 Control Box
If you’re looking for a quality tumbler, you found it. The DVTS 200 Tumbler has variable speed control, 0 - 15 rpm. Easy to clean inside the tank, the lid is as wide as the tank. Safety bar and safety switch. LED timer in hours and minutes, also does batch counting. Nema 4 control panel. Forward and reverse tumbling. Jog switch so you can rotate the tank just where you want it for unloading, loading, and cleaning. Two vacuum filters. Liquid filled vacuum gauge. Drain plug on tank. 115 volt. Optional paddle for aggressive tumbling. Gain profits by tumbling, weight gain, and tenderizing all in minutes.
DMX and QUAD 100 Mixer
Features:
Made in the USA
Easy to Move Around
Four Position Dump
100 QUAD has Two Paddles
All Stainless Steel Construction
Capacity 100 lbs. (45 1/3 Kg.)
Four Swivel Locking Casters
115 Volt
For all your mixing needs. The 100 mixers are reliable well built machines. Easy to remove paddles, no wrenches needed. Two safety switches. Forward and reverse mixing. LED timer, displays hours and minutes. Two hopper locks. The DMX QUAD 100 has two paddles, that rotate in opposite directions. The DMX 100 has one paddle. Drain plug on hopper. Clear hopper lid. Available options: Stainless Steel Grated Lid, Pour Spout, Frame Extension and Hydraulic Lift.
DMX and DMX QUAD 200 Mixer
Features:
Made in the USA
Forward & Reverse Mixing
Four Position Dump
200 QUAD has Two Paddles
All Stainless Steel Construction
Capacity 200 lbs. (90.72 Kg.)
Four Swivel Locking Casters
UL and NSF Listed
For all your mixing needs. The 200 mixers are reliable well built machines. Easy to remove paddles, no wrenches needed. Two safety switches. Forward and reverse mixing. LED timer, displays hours and minutes. Two hopper locks. The DMX QUAD 200 has two paddles, that rotate in opposite directions. The DMX 200 has one paddle. Drain plug on hopper. Clear hopper lid. Available options: Stainless Steel Grated Lid, Pour Spout, Frame Extension and Hydraulic Lift.
